2022 Iron Bull FLG22 102x36 Equipment Trailer

OVERVIEW

Iron Bull Goosenecks are some of the most rugged and longest lasting units in service today. Decades of experience in our new manufacturing company have combined to create one of the most thought out trailers available. New for 2021, included on each Iron Bull tandem dual trailer is Dexter's rugged HDSS adjustable suspension. This is their top-of the line suspension package and it's free on every Iron Bull! You will also find standard a pipe bridge to reduce torque under heavy loads. Heavy SCH40 construction outclasses thin walled pipe as seen on some of the competition. Low-Pro, pierced frame design lowers the deck 3" providing a lower center of gravity, more stable cornering and a lower loading angle for equipment. 12" 19lb/ft I-Beam makes up the main frame of these monsters - compared to the 14lb found on the other guys. Heavy duty 10" I-beam crossmembers are located on the lower main frame to further support the pipe bridge. These important steel beams are omitted by some competitors. 3" Channel crossmembers located in the deck frame are on 16" centers and topped with 2" x 6" treated pine wood and you will find a standard locking toolbox at the front of each gooseneck trailer. Two 16" side steps adorn the front of each deck. Standard -- Not an option -- and oversized to ensure stable footing each and every time you climb on the trailer. All wiring is in a sealed harness and runs inside the 2" x 6" upper deck frame. Sherwin-Williams Powdurda Powder coat gives each trailer a rugged finish with a showroom shine. USA made, lifetime recessed LEDs are provided by TecNic lighting. Each Iron Bull Trailer also comes equipped with stake pockets, pipe spools and rub rails as well as an adjustable coupler. All Iron Bulls are sitting on Dexter Nev-R-Adjust brake axles and roll down the road on radial tires. Select from our multiple tail options including our Rampage Ramps or a hydraulic dove tail and corral your Iron Bull today.

FEATURES

12" I-Beam Frame and Neck (19 lbs/ft)

2 5/16" Adjustable Coupler

3" Structural Crossmembers

2.5 x 2.5 Front Bumper Rail

Lockable Full Neck Width Tool Box

Rub Rail, Stake Pockets & Pipe Spools

Standard Torque Tube & Underframe Bridge

Cambered Dexter Nevr-R-Adjust Brake Axles

Multi-leaf Slipper Spring Suspension

E-Z Lube Hubs

2 Electric Brake Axles

25" Gooseneck Box

8' Slide-in Ramps

2-10k Drop-Leg Jack

Treated Pine 2x6 Floor

4 Standard 3" D-Rings

235/80R16 Radial Tires with 8 Hole Duals

Lifetime LED Lighting

All Lighting DOT Approved

Molded Sealed Harness with Resistors

7-Way Receiver Female Plug with Adapter

Powdura Powder Coat

OPTIONS

2 10k Axles

2 12k Axles

2 15k Axles

3 10k Axles

3 12k Axles

Rampage Ramps

Wood Dove Tail

Adjustable Square Coupler

Self-Cleaning Dovetail

Drop-Leg Jack

12" Crossmembers

HDSS Suspension

Spread Axles

Deck Over Neck

Side Tool Box

Square Gooseneck Coupler

Rough Oak Floor

Cold Weather Harness

Additional D-Rings

14-Ply 235/85 Tire Upgrade

Winch Plate

Tube Rear Support Stands